What is the difference between a cadence sensor and a torque sensor on an e-bike?

A cadence sensor turns the motor on when the cranks are spinning. A torque sensor measures how hard you are pressing the pedals and feeds in more help when you push harder. I have ridden both. On the Pace 500.3, the Level.2 and the Level.3, the torque sensor felt natural, because the assist followed my effort. I have not measured lab numbers for either sensor, and I will not invent them.

Check the Aventon Aventure 3 at Aventon (opens in a new tab)

Some links on this page are affiliate links. If you buy through them, I may earn a commission at no extra cost to you. Read the disclosure.

A cadence sensor and a torque sensor are two ways an e-bike decides when to help you pedal. A cadence sensor looks at whether the cranks are turning. A torque sensor looks at how hard you are pressing. I have ridden both. I have not put either one on a dynamometer, so this is how they felt, not a lab chart.

What each one does

A cadence sensor is closer to an on-off switch. Once your feet are turning, the motor helps at whatever assist level you picked, even if you are only spinning lightly. On cadence-sensor bikes I have tested, that help can kick in after a second or so of pedaling.

A torque sensor measures how hard you push on the pedals and adds power to match. Push harder on a climb and you get more help. Soft-pedal and it eases off. It feels closer to a regular bike, just with a stronger set of legs.

What it felt like on bikes I have ridden

On the Pace 500.3, Aventon’s upgraded torque sensor “feels very natural” while you are riding (video, 3:00 to 3:09). I pointed to that same clip in my hills guide.

On the Level.2, the torque sensor was the biggest upgrade over the first Level. Instead of just measuring how fast your feet go around, it gives you more power the harder you press. I called it the most responsive way I have found to ride an e-bike (video, 3:27 to 3:55).

The Level.3 has a torque sensor too. When I reviewed it, I recommended it as an all-around commuter and a first e-bike, and I said the torque sensor makes pedaling feel natural. The Level 3 is discontinued now, and so is the Pace 500.3. I am describing bikes I have actually ridden, not current buy-now picks.

The Aventure 3 uses a torque sensor in the bottom bracket and can be switched to cadence. The throttle still works from zero, and in torque mode the motor reads how hard you push and adds power to match.

If you want a first e-bike that feels natural on pavement, I would start with a torque-sensor bike and a low assist level. If you buy a cadence-sensor bike, expect the motor to come in more like a switch. Neither one is “better” in a lab sense I can quote. They just feel different under your feet.

Pedal assist itself is defined in what is pedal assist. For throttle versus assist, see throttle vs pedal assist.

Related

Sources

Updated